Sunday, October 29, 2017

USG - How to configure in existing multiple VLAN network


The trick was to have the management network untagged and the other network(s) tagged.

The error I made was to have de management network tagged as well.

I've changed the port on the switch to untagged VLAN 10 and tagged VLAN 2.
I removed all the networks from the USG, changed the primary IP to the correct one in VLAN 10. After a few second I could reach it on the correct network and added the other network.

https://www.blogger.com/blogger.g?blogID=8575246386029674811#editor

No comments:

Post a Comment

Juniper EX-3400 VC

Easiest way to stack two EX3400's is make sure they are on the same code level. Then connect them using the QSFP+ ports. Boot the master...